Saturday, December 31, 2011

CS Hyde Kapton with Silicone Adhesive, 2mm Thick, Amber, 10.5" Width x 36 Yard Roll

CS Hyde Kapton with Silicone Adhesive, 2mm Thick, Amber, 10.5" Width x 36 Yard Roll Review



CS Hyde Kapton with Silicone Adhesive, 2mm Thick, Amber, 10.5" Width x 36 Yard Roll Feature

  • Kapton tape maintains high temperature resistance to 500F
  • Kapton® tape is a good electrical insulator, meeting class H requirements
  • This tape provides excellent abrasion resistance and high dielectric strength
  • High conformability and resistance to solvents
  • Clean release adhesive does not leave residue
Kapton® tape with pressure sensitive silicone adhesive. This tape is used primarily for high temperature masking in powder coating and in electrical applications such as capacitor wrapping, gold finger masking, transformer insulation, coils, flat cables, connectors and high temperature harness wrapping.


Wednesday, December 28, 2011

Red Devil Industrial Grade Heat Resistant Rtv Silicone Sealant (0809/0I)

Red Devil Industrial Grade Heat Resistant Rtv Silicone Sealant (0809/0I) Review



Red Devil Industrial Grade Heat Resistant Rtv Silicone Sealant (0809/0I) Feature

  • 10.1 Oz. Cartridge
  • Red
  • When fully cured withstands -85 deg. to 600 deg. F (intermittent)
  • Apply at 10 to 100 deg. F
  • Seals oven belts, heating elements in appliances, flanged pipe joints, fired heaters, access doors a
Sold as each. 10.1 Oz. Cartridge. Red. When fully cured withstands -85 deg. to 600 deg. F (intermittent). Apply at 10 to 100 deg. F. Seals oven belts, heating elements in appliances, flanged pipe joints, fired heaters, access doors and drying ovens. For porcelain, ceramic, glass, marble, fiberglass, painted surfaces, non-oily surfaces and most metals. Resists cracking, shrinking, peeling and vibration. WIthstands +25% joint movement. Waterproof and weatherproof. Red. UL listed. Meets military spec MIL-A-46106A. Meets FDA regulation No. 21 CFR 1772600 when fully cured and washed. Authorized by USDA for use in federally inspected meat and poultry plants. . Manufacturer's number: 0809/0I. Country of origin: United States. Distributed by Red Devil, Inc.


Tuesday, December 27, 2011

HIGH TEMP SILICONE - RTV Red Silicone

HIGH TEMP SILICONE - RTV Red Silicone Review



HIGH TEMP SILICONE - RTV Red Silicone Feature

  • Premium Industrial RTV Silicone Sealant Acetoxy Curing 10.1 oz. Caulking Cartridge with re-seal tip
When the heat is on you need our HI-TEMP RED 100% RTV Silicone Rubber Sealant! It is great when your application may get up to 650 degrees F! 11106 SERIES-100% RTV SILICONE HI-TEMP RED is a high quality, single-component, 100% silicone sealant. It is ideally suited for use in high heat applications such as sealing and encapsulating heating elements in appliances, aerospace gasketing, moving oven belts, industrial ovens, bag filters on smoke stacks, other critical bonding, sealing, potting, encapsulating and protective coatings where parts must perform at high temperatures. Can be used as an adhesive for bonding surfaces together. Adheres to metal, glass, marble, tile, ceramic, porcelain, painted surfaces, non-oily woods, and rubber. Perfect for use in automotive and industrial gasketing applications. Specifications: USDA for use in federally inspected meat and poultry plants, FDA reg. #21, CFR 177.2600, TT-S-0015443A (COM-NBS) Class A, TT-S00230C (COM-NBS) Class A MIL-A-46106B Amend. 3, Type 1. Canadian 19-GP-9MA Type 1. Meets ASTM C920, Class 25. Conforms to NSF Standard 51. Packaging: 11100 Series Premium Industrial Silicone is supplied in a 10.1oz (300ml) caulking cartridge, 5 gallon pails, and 55 gallon drums. Warranty and Shelf Life: Each application should be pre-tested for suitability of this product for the intended use. When stored in the original, unopened container at temperatures less than 90 degrees F (32 degrees C), our Silicones are guaranteed for one year from date of purchase.


Saturday, December 24, 2011

Silicone Sponge Rubber Sheet, Adhesive-Backed, Soft-Medium Density, Textured, AMS 3195, Orange, 0.125" Thick, 24" Width, 24" Length

Silicone Sponge Rubber Sheet, Adhesive-Backed, Soft-Medium Density, Textured, AMS 3195, Orange, 0.125" Thick, 24" Width, 24" Length Review



Silicone Sponge Rubber Sheet, Adhesive-Backed, Soft-Medium Density, Textured, AMS 3195, Orange, 0.125" Thick, 24" Width, 24" Length Feature

  • Low compression set closed-cell foam structure
  • High temperature silicone (rated up to 450°F)
  • Soft-Medium Density
  • UV/Ozone resistant
  • Excellent gasketing material
Silicone sponge rubber sheets are low compression set, soft-medium firmness, closed cell silicone sponge materials. Sheets are available with and without adhesive. It handles temperature extremes; excellent gasketing material with very low compression set and is UV and Ozone resistant.


Friday, December 23, 2011

Dap 08640 Bathroom Silicone Rubber Caulk 10.1-Ounce White

Dap 08640 Bathroom Silicone Rubber Caulk 10.1-Ounce White Review



Dap 08640 Bathroom Silicone Rubber Caulk 10.1-Ounce White Feature

  • All purpose bathroom caulk
  • Seals nonporous surfaces around ceramic tile and plumbing fixtures with 100-Percent silicone rubber
  • Meets requirements of FDA regulation number 21 CFR 177 2600
  • White
  • 10.3 fl-Ounce
100% silicone rubber with mildicide. Excellent for sealing around ceramic tiles and plumbing fixtures. Won't crack, crumble, or dry out. White. No. 00680: 3 oz. squeeze tube No. 08640: 10 oz. cartridge


Wednesday, December 14, 2011

CS Hyde Solid Silicone Rubber, FDA Grade, Acrylic Adhesive, 0.125" Thick, 50 Durometer, Translucent, 12" Width, 12" Length

CS Hyde Solid Silicone Rubber, FDA Grade, Acrylic Adhesive, 0.125" Thick, 50 Durometer, Translucent, 12" Width, 12" Length Review



CS Hyde Solid Silicone Rubber, FDA Grade, Acrylic Adhesive, 0.125" Thick, 50 Durometer, Translucent, 12" Width, 12" Length Feature

  • Solid silicone rubber is translucent and FDA approved per CFR 177.2600
  • Approved for repeated use in contact with foods
  • Non-yellowing and will not discolor
  • Low volatile, peroxide free and non-toxic
  • Fungus resistant and low compression set
Translucent, FDA approved solid silicone rubber exhibits a wish list of characteristics including superb chemical resistance, high temperature performance, good thermal and electrical resistance as well as long-term resiliency. Product is easy to fabricate.


Monday, December 12, 2011

CS Hyde Skived Teflon with Silicone Adhesive, Liner, 5mm Thick, Tan, 2" Width x 5 Yard Roll

CS Hyde Skived Teflon with Silicone Adhesive, Liner, 5mm Thick, Tan, 2" Width x 5 Yard Roll Review



CS Hyde Skived Teflon with Silicone Adhesive, Liner, 5mm Thick, Tan, 2" Width x 5 Yard Roll Feature

  • Skived Teflon film with clean release silicone adhesive
  • Low coefficient of friction
  • Thin and conformable
  • Stable and non-toxic
  • Excellent high temperature resistance
Superior release surface on packaging equipment and heat sealing machines, roll coverings, guide rails, and angle bars.


Sunday, December 11, 2011

CS Hyde Kapton with Silicone Adhesive, 2mm Thick, Amber, 0.25" Width" x 36 Yard Roll

CS Hyde Kapton with Silicone Adhesive, 2mm Thick, Amber, 0.25" Width" x 36 Yard Roll Review



CS Hyde Kapton with Silicone Adhesive, 2mm Thick, Amber, 0.25" Width" x 36 Yard Roll Feature

  • Kapton tape maintains high temperature resistance to 500F
  • Kapton® tape is a good electrical insulator, meeting class H requirements
  • This tape provides excellent abrasion resistance and high dielectric strength
  • High conformability and resistance to solvents
  • Clean release adhesive does not leave residue
Kapton® tape with pressure sensitive silicone adhesive. This tape is used primarily for high temperature masking in powder coating and in electrical applications such as capacitor wrapping, gold finger masking, transformer insulation, coils, flat cables, connectors and high temperature harness wrapping.


Saturday, December 10, 2011

High Temperature Silicone Rubber Sheet, Adhesive-Backed, 50A Durometer, Smooth, MIL-ZZR-765, Translucent White, 1/32" Thick, 12" Width, 12" Length

High Temperature Silicone Rubber Sheet, Adhesive-Backed, 50A Durometer, Smooth, MIL-ZZR-765, Translucent White, 1/32" Thick, 12" Width, 12" Length Review



High Temperature Silicone Rubber Sheet, Adhesive-Backed, 50A Durometer, Smooth, MIL-ZZR-765, Translucent White, 1/32" Thick, 12" Width, 12" Length Feature

  • High temperature resistance
  • Retains high flexibility
  • Excellent resistance to water
  • Good electrical insulation properties
High Temperature Silicone Rubber is commonly used in applications over 500° F. Industrial applications include food processing, packaging, refrigeration, furnaces, lighting, gaskets for crank shaft housings, sumps, gear boxes, water pumps, gas appliances, flues, pipes, heaters, and electrical and electronic devices.\


Thursday, December 8, 2011

CS Hyde Conformable PTFE Tape With Silicone Adhesive, Brown 1 inch x 36 yards

CS Hyde Conformable PTFE Tape With Silicone Adhesive, Brown 1 inch x 36 yards Review



CS Hyde Conformable PTFE Tape With Silicone Adhesive, Brown 1 inch x 36 yards Feature

  • Possesses smooth, slippery surface and anti-friction properties.
  • Superior insulating and dielectric strength.
  • Teflon (PTFE) is chemically resistant to most solvents and acids as well as ozone and UV.
  • This tape maintains high temperature resistance to 500F
Conformable Teflon tape with pressure sensitive silicone adhesive is a high-density tape that offers greater tensile strength, higher dielectric properties and less elongation that regular Teflon tape. This tape is the ultimate in release, durability, low stretch / high strength characteristics. It releases cleanly without residue at high temperatures. This product is used in electrical applications such as coil wraps and separators, transformer, slot liners and harness wrapping where good insulation and heat resistance are needed.


Sunday, December 4, 2011

CS Hyde Teflon Coated Fiberglass with Silicone Adhesive, No Liner, 3mm Thick, Tan, 2" Width x 5 Yard Roll

CS Hyde Teflon Coated Fiberglass with Silicone Adhesive, No Liner, 3mm Thick, Tan, 2" Width x 5 Yard Roll Review



CS Hyde Teflon Coated Fiberglass with Silicone Adhesive, No Liner, 3mm Thick, Tan, 2" Width x 5 Yard Roll Feature

  • Teflon coated fiberglass tape with a clean release silicone adhesive.
  • Frequently used by the packaging industry as a release surface.
  • Combination of Teflon and fiberglass allows tape to perform in continuous high temperatures.
  • Resistant to tears, punctures, abrasion and wear.
  • Dimensionally stable.
The durability and anti-stick properties make it an ideal material for the lining of guide rails, chutes and slides. Frequently used on heat sealers, blister formation and form-fill-seal equipment. The high temperature capabilities and non-stick properties allow it to perform as an excellent release surface.


Saturday, December 3, 2011

CS Hyde Aluminum Foil / Fiberglass with Silicone Adhesive, No Liner, 7mm Thick, Silver, 2" Width x 5 Yard Roll

CS Hyde Aluminum Foil / Fiberglass with Silicone Adhesive, No Liner, 7mm Thick, Silver, 2" Width x 5 Yard Roll Review



CS Hyde Aluminum Foil / Fiberglass with Silicone Adhesive, No Liner, 7mm Thick, Silver, 2" Width x 5 Yard Roll Feature

  • Aluminum Foil laminated to fiberglass cloth with high temperature, clean release silicone adhesive.
  • Plasma or Flame spray masking tape
  • High temperature resistant makes it ideal for heat and reflectant tapes
  • Wire harness bundling tape
  • Used as a sound and vibration dampening product
This tape is designed for extremely high demand thermal spray applications. It provides excellent abrasion and temperature resistance and conforms very well to a wide variety of surface configurations.


Friday, December 2, 2011

CS Hyde Teflon / Fiberglass Laminate with Silicone Adhesive Liner, 4mm Thick, Red, 0.5" Width x 5 Yard Roll

CS Hyde Teflon / Fiberglass Laminate with Silicone Adhesive Liner, 4mm Thick, Red, 0.5" Width x 5 Yard Roll Review



CS Hyde Teflon / Fiberglass Laminate with Silicone Adhesive Liner, 4mm Thick, Red, 0.5" Width x 5 Yard Roll Feature

  • Fiberglass fabric impregnated with PTFE dispersion, laminated to PTFE film, clean release silicone adhesive
  • Release surface for heat sealing, blister formation and form-fill equipment
  • Laminate construction offers an additional 1 mil. PTFE coating
  • More durable and longer lasting than standard PTFE coated products
  • Dimensionally stable, resistant to tears, punctures, abrasion and wear
The combination of uniform and pin-hole-free film enables this tape to outperform standard PTFE coated tapes.


Monday, November 28, 2011

Henkel 1154725 Loctite 0.85-Ounce Quick Set Epoxy, Clear

Henkel 1154725 Loctite 0.85-Ounce Quick Set Epoxy, Clear Review



Henkel 1154725 Loctite 0.85-Ounce Quick Set Epoxy, Clear Feature

  • Sets in 4-6 minutes
  • Waterproof, high strength, solvent-resistant bond
  • Works on wood, metal, ceramic, glass, plastic and tile
  • Resistant to solvents, moisture and impact
  • Syringe applicator dispenses equal amounts of resin and hardener every time
Combines fast curing with excellent shock, strength, and gap filling characteristics. Quick 'N Easy applicator eliminates the need for separate measuring. Sets in 5 minutes. 1 oz. tube.


Sunday, November 27, 2011

Silicone Sponge Rubber Sheet, Adhesive-Backed, Soft-Medium Density, Textured, AMS 3195, Orange, 0.500" Thick, 24" Width, 24" Length

Silicone Sponge Rubber Sheet, Adhesive-Backed, Soft-Medium Density, Textured, AMS 3195, Orange, 0.500" Thick, 24" Width, 24" Length Review



Silicone Sponge Rubber Sheet, Adhesive-Backed, Soft-Medium Density, Textured, AMS 3195, Orange, 0.500" Thick, 24" Width, 24" Length Feature

  • Low compression set closed-cell foam structure
  • High temperature silicone (rated up to 450°F)
  • Soft-Medium Density
  • UV/Ozone resistant
  • Excellent gasketing material
Silicone sponge rubber sheets are low compression set, soft-medium firmness, closed cell silicone sponge materials. Sheets are available with and without adhesive. It handles temperature extremes; excellent gasketing material with very low compression set and is UV and Ozone resistant.


Saturday, November 26, 2011

Dap 18806 Fire Stop Sealant 10.1-Ounce

Dap 18806 Fire Stop Sealant 10.1-Ounce Review



Dap 18806 Fire Stop Sealant 10.1-Ounce Feature

  • Classified for sealing around plumbing and wiring penetration through fire-rated walls and floors
  • Light Gray
  • 10.1 oz
DAP 18806 FIRE STOP Fire-Rated Silicone Sealant, Light GreyMeets ASTM E 814/UL 1479 and UL 2079 specifications. Classified for sealing fire-rated, non-combustible service penetrations and construction joints in horizontal and vertical fire separations. Elastomeric - capable of +-25% dynamic joint movement.DAP 18806 FIRE STOP Fire-Rated Silicone Sealant, Light Grey Features:; Classified for sealing around plumbing and wiring penetration through fire-rated walls and floors; Light Gray; 10.1 oz


Friday, November 25, 2011

Thermwell Prods. Co. SS20CL Self Stick Silicone Weatherseal

Thermwell Prods. Co. SS20CL Self Stick Silicone Weatherseal Review



Thermwell Prods. Co. SS20CL Self Stick Silicone Weatherseal Feature

  • Thermwell #SS20CL 1/2x1/4x20CLR SiliTape
  • THERMWELL
Silicone weatherseal with self stick tape by Frost King Thermwell. Ideal for doorways or similar applications. Smoke seal. Built in memory retains shape. Will not harden, crack, or freeze. 10 year guarantee. No. SS20BRDB: 1 2'' W. x 1 4'' T. x 20' L., brown No. SS20CL: 3 8'' W. x 5 16'' T. x 17' L., clear